IBM Computer Drive 22P6972 User Manual
ꢀꢁꢂ  
IBM Multi-Burner  
User’s Guide  
 
ꢀꢁꢂ  
IBM Multi-Burner  
User’s Guide  
 
Note: Before using this information and the product it supports, be sure to read the information under  
Appendix D, “Warranty information” on page D-1 and Appendix E, “Notices” on page E-1.  
Second Edition (August 2002)  
© Copyright International Business Machines Corporation 2002. All rights reserved.  
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract  
with IBM Corp.  
 
Contents  
Safety: Read first. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v  
About this book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii  
Registering your product.  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. vii  
Installation and user’s guide . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1  
Product description  
Software description .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 1-1  
. 1-1  
. 1-2  
. 1-2  
. 1-2  
. 1-3  
. 1-4  
. 1-4  
. 1-4  
. 1-4  
. 1-5  
. 1-5  
. 1-6  
. 1-6  
. 1-6  
. 1-6  
. 1-6  
. 1-7  
. 1-8  
. 1-8  
. 1-8  
. 1-8  
. 1-8  
. 1-8  
. 1-9  
. 1-9  
. 1-10  
. 1-10  
. 1-10  
Installation requirements.  
Before you begin  
Handling precautions .  
.
.
.
Drive controls and connectors .  
Installing the drive.  
Step 1. Opening the computer .  
Step 2. Unpacking the drive  
.
.
.
.
.
.
Step 3. Setting the configuration jumpers  
Step 4. Mounting the drive in the bay  
Step 5. Attaching the cables to the drive  
.
Step 6. Completing the hardware installation .  
Step 7. Installing the software .  
Using the drive . .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Using single and double-sided DVD-RAM media  
Removing the disc from the cartridge  
Using the drive with CDs and DVDs  
Securing a disc in a vertically mounted drive .  
Manually ejecting a disc .  
Using the DVD Player software  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Before using the software  
Using the DVD Player  
Changing the DVD region code  
.
.
.
Using drive letter access (DLA)  
Using roxio VideoWave .  
Maintaining the drive  
Caring for a CD or DVD  
Caring for the drive .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Appendix A. Product specifications . . . . . . . . . . . . . . . . . . . . . . . A-1  
Appendix B. Problem solving . . . . . . . . . . . . . . . . . . . . . . . . . B-1  
Appendix C. Customizing the device driver configuration settings . . . . . . . . . C-1  
Enabling DMA for Windows Me .  
Enabling DMA for Windows 2000 Professional .  
Enabling DMA for Windows XP .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. C-1  
. C-1  
. C-2  
.
.
.
.
.
Appendix D. Warranty information . . . . . . . . . . . . . . . . . . . . . . . D-1  
Warranty period  
Service and support .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. D-1  
. D-1  
. D-1  
. D-1  
. D-1  
. D-3  
. D-3  
. D-5  
Warranty information on the World Wide Web .  
Online technical support  
Telephone technical support  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
IBM Statement of Limited Warranty Z125-4753-06 8/2000  
Part 1 - General Terms  
Part 2 - Country-unique Terms  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
© Copyright IBM Corp. 2002  
iii  
 
Appendix E. Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-1  
Trademarks .  
Electronic emissions notices  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. E-1  
. E-2  
. E-2  
Federal Communications Commission (FCC) statement  
iv IBM Multi-Burner User’s Guide  
 
Safety: Read first  
Before installing this product, read the Safety Information.  
Antes de instalar este produto, leia as Informações de Segurança.  
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.  
Læs sikkerhedsforskrifterne, før du installerer dette produkt.  
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.  
Avant d’installer ce produit, lisez les consignes de sécurité.  
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.  
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.  
Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.  
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.  
Antes de instalar este produto, leia as Informações sobre Segurança.  
Pred inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisy.  
Antes de instalar este producto lea la información de seguridad.  
© Copyright IBM Corp. 2002  
v
 
 
Läs säkerhetsinformationen innan du installerar den här produkten.  
vi IBM Multi-Burner User’s Guide  
 
About this book  
This guide contains information on the IBM® Multi-Burner, and is available in the following languages:  
v English  
v French  
v German  
v Spanish  
v Italian  
v Brazilian Portuguese  
v Simplified Chinese  
v Traditional Chinese  
v Japanese  
The guide is divided into the following parts:  
Installation and user’s guide  
This section contains a product description, and installation and operating instructions.  
Appendices  
This section contains information on  
v Product specifications  
v Problem solving  
v Customizing the device driver configuration settings  
v Help and service  
v Warranty, and notices  
Be sure to retain your proof of purchase. It might be required for warranty service.  
Registering your product  
Thank you for purchasing this IBM product. Please take a few moments to register your product and  
provide us with information that will help IBM to better serve you in the future. Your feedback is  
valuable to us in developing products and services that are important to you, as well as in developing  
better ways to communicate with you. Register your product on the IBM Web site at  
http://www.ibm.com/pc/register  
IBM will send you information and updates on your registered product unless you indicate on the Web  
site questionnaire that you do not want to receive further information.  
© Copyright IBM Corp. 2002  
vii  
 
 
viii IBM Multi-Burner User’s Guide  
 
Installation and user’s guide  
This section contains the product description, hardware and software installation instructions, and  
operating information for the IBM Multi-Burner.  
Product description  
This option package is intended for multimedia applications. The drive comes with a CD containing  
MPEG-2 decoder software for the following operating systems:  
v Microsoft® Windows® 2000 Professional  
v Microsoft Windows Millennium Edition (Me)  
v Microsoft Windows XP  
In addition to this User’s Guide, provided on the IBM Multi-Burner User’s Guide and Software Disc 1, your  
option package contains the following:  
v IBM Multi-Burner  
v Media Pak containing:  
– one 4.7 gigabyte (GB) DVD-RAM disc  
– one 4.7 GB DVD-RW disc  
– one 4.7 GB DVD-R disc  
v IBM Multi-Burner User’s Guide and Software Disc 2  
v Four mounting screws (M3 x 5-mm, slotted)  
v Internal audio ″Y″ cable  
v IBM Multi-Burner Quick Start Guide  
v Laser Safety Guide  
Contact your place of purchase if an item is missing or damaged. Be sure to retain your proof of  
purchase; it might be required to receive warranty service. See Appendix D, “Warranty information” on  
page D-1 for technical support information.  
Your Multi-Burner is compatible with the DVD Forum DVD-Multi Recorder specification, and can record  
as well as read DVD-RAM, DVD-RW, and DVD-R (for General, 650 nm) media. Your drive can also  
record CD-R, CD-RW, and High-Speed CD-RW media, and uses buffer underrrun prevention technology  
for reliable CD burning. Your Multi-Burner can read many other formats including DVD Video, Video  
CD, audio CD, multiple-session, extended architecture (XA) CDs, and Kodak Photo CDs. The  
Multi-Burner is designed for installation in a computer that uses integrated drive electronics (IDE) or  
enhanced IDE (EIDE) architecture.  
Software description  
Your IBM Multi-Burner User’s Guide and Software Disc 1 and Disc 2 contain the following software:  
v roxio VideoWave:  
This software enables you to record video files to DVD-RW or DVD-R media that can be played in  
most stand-alone DVD players. You can also use this software to edit and modify your own video  
assets prior to recording.  
If you have an analog or IEEE 1394 capture device installed in your computer, you can use this  
software to record video from a camera.  
v IBM Drive Letter Access (DLA)  
This software enables you to write directly to CD-RW, CD-R, DVD-RAM, DVD-RW, and DVD-R media  
using the drive letter like you would if you were writing to a diskette. You can also format DVD-RAM,  
© Copyright IBM Corp. 2002  
1-1  
 
 
DVD-RW, and DVD-R media. With DLA, you can drag-and-drop files, create new directories, or save  
files from any application directly to your Multi-Burner.  
v UDF reader  
This software enables you to install software for reading DVD-RAM, DVD-RW, and CD-RW media on  
computers with DVD drives.  
v IBM Record Now  
This software enables you to copy CDs, create audio CDs, create MP3 CDs, and author data CDs. You  
can also use RecordNow to write data to DVD-R and DVD-RW discs for use in other computers or  
compatible consumer electronics products.  
v IBM Simple Backup  
This software enables you to create full or incremental backups of your system files on DVD-RAM,  
DVD-RW, DVD-R, CD-R, or CD-RW media, and allows you to restore your computer if it crashes.  
v Intervideo WinDVD  
This software enables you to play back DVD videos on your computer or to play video files from your  
hard disk drive.  
Note: Some graphics adapters such as the FIREGL, Intergraph, and 3dLabs, do not support DVD video  
playback.  
Installation requirements  
Be sure that your computer meets the following system requirements before installing the drive:  
v Minimum microprocessor: Intel® Pentium® or equivalent  
Note: For DVD authoring and playback, you must have an Intel Pentium II 266MHz microprocessor or  
higher and AGP 2X Video.  
v Minimum RAM: 32 MB (Systems with UMA: 64 MB)  
v Windows 2000 Professional, Windows Me, or Windows XP  
v An available 5.25-in. drive bay  
v An available IDE connection  
v 120 MB available hard disk space for programs, and 1 GB available hard disk space for DVD authoring  
functions  
v Screen resolution of 1024 x 768 pixels required for DVD authoring functions  
v Audio adapter supporting 44.1 or 48 kHz sampling rate  
v Optional stereo speakers  
Before you begin  
Before you install the Multi-Burner, read the information in the following sections.  
Handling precautions  
Use the following handling precautions to protect your drive:  
v Keep the Multi-Burner in the antistatic bag until you are ready to install the drive. Limit your  
movement when installing; movement can cause static electricity to build.  
v Handle the drive with care. Dropping or jarring the drive can damage the components inside the drive.  
v Do not force insertion of the IDE or power cables. Doing so might damage the connector or the drive.  
1-2 IBM Multi-Burner User’s Guide  
 
 
Drive controls and connectors  
The following diagrams show the location and functions of the drive controls and connectors.  
Front view of the drive  
M U L T I  
RECORDER  
ReWritable  
ꢀ1ꢁDisc drawer  
This drawer is where you load and unload a disc.  
ꢀ2ꢁBusy indicator  
This light comes on when the drive reads from, writes to, or plays a disc.  
ꢀ3ꢁEmergency eject hole  
This hole provides access to the eject mechanism to remove a disc from the drive.  
ꢀ4ꢁOpen/Close button  
This button opens and closes the disc drawer when you push it.  
Rear view of the drive  
Pin 1  
ꢀ1ꢁReserved  
ꢀ2ꢁAudio-out connector  
This connector transmits the analog audio signals to an audio adapter.  
ꢀ3ꢁConfiguration pins  
These pins are used to set the drive configuration.  
ꢀ4ꢁIDE port  
This connects the drive to the IDE cable.  
ꢀ5ꢁPower connector  
This connects the drive to the power cable.  
Installation and user’s guide 1-3  
 
 
Installing the drive  
Complete the following steps to install the drive:  
Step 1. Opening the computer  
1. Turn off the computer and all attached devices.  
2. Unplug all power cords from the computer and all attached devices.  
3. Remove the cover from the computer. Refer to your computer documentation for instructions on  
removing the computer cover.  
Step 2. Unpacking the drive  
1. Before opening the antistatic bag that the drive is packed in, touch the bag to an unpainted metal  
surface for at least two seconds. This drains the static electricity from the package and your body.  
2. Remove the drive from the bag.  
If you must put the drive down, place the antistatic bag on a flat, padded surface, and place the drive  
on the antistatic bag.  
Step 3. Setting the configuration jumpers  
You can configure your drive as master ꢀ1ꢁ, slave ꢀ2ꢁ, or cable-select ꢀ3ꢁ, by placing the jumper over the  
configuration pins as shown.  
Use the following guidelines to determine the correct configuration for your drive.  
v Configure the drive as a master if it will be the only device that is connected to the IDE cable. This is  
the preset configuration.  
v Configure the drive as a slave if it will be the second device on an IDE cable. Be sure to configure the  
other device as a master. In some cases, a hard disk drive might require a “master with slave present”  
jumper setting when another device on the same cable is configured as a slave. For more information  
on setting configuration jumpers on other devices, refer to the documentation that comes with your  
computer.  
v Some non-IBM computers use special ATA cables with two wires reversed in the device connectors so  
that the drives can be configured by the cable instead of by jumper position. Use the cable-select  
position only for computers that are equipped with these special cables. See the documentation that  
comes with your computer to determine if your ATA adapter requires that you place the jumpers in the  
cable-select position.  
If you place the jumper in the cable-select position, the IDE cable automatically assigns the master and  
slave settings based on the position of the drive on the cable. You must use the cable-select setting for  
this cabling system whether the drive is the only device or the second device connected to the cable.  
The drive closest to the IDE controller is automatically the master drive. Any other devices on the IDE  
cable must also be set to cable-select.  
1-4 IBM Multi-Burner User’s Guide  
 
 
Step 4. Mounting the drive in the bay  
Attention  
Be sure to use the M3 x 5-mm mounting screws in the option package when securing screws  
directly into the drive. Using screws that are too long might damage the drive.  
You can mount the drive horizontally or vertically in the computer. If you mount the drive vertically, you  
must secure any discs that you place into the drive before the drive tray is closed, or the drive will not be  
able to read the disc properly.  
1. Slide the drive into the bay. Your computer might have required procedures for installing storage  
devices. For more information on storage devices, refer to the documentation that comes with your  
computer.  
2. Align the drive-bay screw holes with the threaded holes in the drive housing or mounting bracket.  
3. Thread the screws in loosely to check their position. Two screws are usually used on each side. Verify  
that the alignment is correct; then tighten the screws to secure the drive. Do not overtighten.  
Step 5. Attaching the cables to the drive  
The following diagram shows where to connect the cables to the drive.  
The following is an illustration of the internal audio cable that comes with your option package.  
Note: Some computers have a smaller connector that is incompatible with the included internal audio  
cable. If your computer has this kind of connector, you might need to purchase a new audio cable.  
1. Connect the single-connector end ꢀ4ꢁof the included internal audio cable to the appropriate connector  
on the computer system board.  
2. Connect one of the dual-connector ends ꢀ1ꢁof the included internal audio cable to the audio-out  
connector on the drive. If you have another optical drive in your computer, you can connect the other  
dual-connector end to that drive.  
3. Attach a 40-pin IDE-cable connector ꢀ2ꢁto the IDE connector on the drive. Align the cable so that the  
color-coded edge is closest to the power cable connector ꢀ3ꢁ. Use the IDE cable that is provided with  
this option if there is no cable attached to the IDE port or if there is only one device connector on the  
computer IDE cable. The IDE cable can have up to three connectors. For the best signal quality when  
you are connecting only one device to the IDE cable, connect one end of the cable to the IDE port,  
and connect the other end of the cable to the device. Do not use the middle connector.  
Installation and user’s guide 1-5  
 
 
If you are connecting two devices to the IDE cable, connect one end of the cable to the IDE port, and  
connect the master and slave devices to the remaining connectors on the other end. Many computers  
have two cables for attaching up to four ATA devices. For best performance, attach fast devices (hard  
disk drives) to the cable that is connected to the primary IDE port, and connect the drive or other  
slower devices (CD-ROM drives, tape drives, diskette drives) to the cable that is connected to the  
secondary IDE port.  
4. Attach a four-pin power cable ꢀ3ꢁto the power connector on the drive.  
Be sure that the cables will not be pinched or crowded by the computer cover and that all other cable  
and power connections are secure.  
Step 6. Completing the hardware installation  
1. Ensure that the drive is securely mounted and that the connectors are firmly attached.  
2. Ensure that the cables do not interfere with the computer cover, and that they do not block the  
power-supply fan blades or airflow paths.  
3. Reinstall the computer cover.  
4. Reconnect all external devices.  
5. Reconnect all power cords into the electrical outlets.  
Step 7. Installing the software  
All of the software for the drive is contained on the User’s Guide and Software Discs. The User’s Guide and  
Software Disc 1 contains this User’s Guide, IBM RecordNow, IBM Simple Backup, and IBM DLA. The  
User’s Guide and Software Disc 2 contains Intervideo WinDVD and roxio VideoWave. Complete the  
following procedure to install the software:  
1. Decide which software you wish to install.  
2. Insert either the User’s Guide and Software Disc 1 or the User’s Guide and Software Disc 2 into the drive.  
If the CD starts automatically, skip to step 6.  
3. If the CD does not automatically start, click Start, and then click Run.  
4. Type e:\launch.bat where e is the drive letter of the CD or DVD drive.  
5. Click OK.  
6. Select your language.  
7. Select the software you want to install.  
8. Follow the on-screen instructions.  
9. After the software is installed, restart the computer.  
10. Repeat for each software application.  
Note: For full drive functionality, install all software applications listed in the browser window.  
Using the drive  
This section contains information on using the Multi-Burner.  
Using single and double-sided DVD-RAM media  
DVD-RAM media is available in single-sided and double-sided versions.  
The 2.6 GB and 4.7 GB versions are single-sided. The 9.4 GB versions are double-sided. To access the data  
on both sides of the media, you must remove the media from the drive, turn it over, and re-insert it into  
the drive.  
Removing the disc from the cartridge  
DVD-RAM media is available in bare-disc or cartridge form. To use cartridge media in your Multi-Burner,  
you must first remove the disc from the cartridge.  
1-6 IBM Multi-Burner User’s Guide  
 
 
Removing the disc from the cartridge  
2a  
3a  
Using the tip of a ball point pen, push and break the lock pin tabꢀ1ꢁ. To remove the disc, use a ball point  
pen to push down on the cartridge lid lock ꢀ2ꢁand pull the cartridge lid out ꢀ3ꢁ. When the cartridge lid  
is open, the disc can be removed.  
Note: The cartridge lid lock and the cartridge lid tab are located on the side of some cartridges, as shown  
in ꢀ2aꢁand ꢀ3aꢁ above.  
Attention  
Do not touch the recording area of the disc when handling bare media.  
Returning the disc to the cartridge  
To return the disc to the cartridge, align the label side of the disc ꢀ1ꢁwith the DVD-RAM cartridge label  
side. Insert the disc and close the cartridge lid ꢀ2ꢁ. A clicking sound will occur when the lid closed.  
Precautions for handling  
Be careful when handling the removed disc. Debris, dust particles, fingerprints, smears, or scratches may  
impair recording and playback of the media. To clean dust or other debris, use a CD Cleaning Kit. Use a  
soft, dry cloth to clean the disc. Do not use solvents to clean the disc surface. When labeling a disc, write  
only on the printed label side or the cartridge using a soft felt-tip marker. Keep out of direct sunlight,  
high temperatures, and humidity. Do not attach labels to either side of the disc.  
Using the drive with CDs and DVDs  
Complete the following procedure to read a data disc:  
1. Turn on the computer.  
2. Press the Open/Close button on the front of the drive.  
3. Insert a disc or cartridge in the tray with the label facing up.  
4. Close the tray by pressing the Open/Close button or by gently pushing in the loading tray.  
Attention: Do not use force or insert foreign objects to open the loading tray.  
5. Wait for the drive busy indicator to turn off; then double-click My Computer.  
Installation and user’s guide 1-7  
 
 
6. Double-click the CD-ROM or DVD-RAM/DVD-R/DVD-RW icon.  
Securing a disc in a vertically mounted drive  
The drive has four retainers molded into the loading tray for vertical mounting operation.  
To insert a disc, place it in the lower two retainers before closing the tray.  
To remove a disc, open the tray and lift the disc from the two lower retainers.  
Manually ejecting a disc  
If the drive becomes inoperable and will not eject the disc, turn off the computer and straighten a large  
paper clip to form a tool. The straightened end must extend at least 45 mm (1.8 in.). Insert the extended  
end into the emergency eject hole on the front of the drive (see “Front view of the drive” on page 1-3).  
Push the paper clip until the tray opens. Gently pull out the tray until you can remove the disc.  
Using the DVD Player software  
This section describes how to use and customize the DVD Player software. You can find current  
information on DVD Player software in the readme file on the User’s Guide and Software Disc 1.  
Before using the software  
WinDVD requires a compatible video device driver and IDE bus mastering in order to work. See  
Appendix C, “Customizing the device driver configuration settings” on page C-1 for information on  
enabling DMA bus mastering and for locating video device drivers.  
Using the DVD Player  
When you insert a DVD Video disc into the drive, the DVD Player software will automatically load and  
begin to play the video disc. If the DVD disc contains both video and program content, the program  
content will automatically play.  
To view the video content of a video/program DVD disc, go to the Start menu, launch WinDVD, and  
click Play.  
In Microsoft Windows XP, you can also play DVD Video content by using the Windows Media Player  
application.  
Changing the DVD region code  
Regionalization and Copy Protection (the DVD region code) uses the content scramble system (CSS)  
standard to prevent unauthorized duplication of the intellectual property rights distributed on DVDs. It  
was originally requested by the Motion Picture Association of America (MPAA) to address video piracy,  
but is applicable to any content. CSS works by inhibiting the transmission of unencrypted data without  
proper authorization. Playback systems must license CSS to decode the encrypted data.  
The CSS specification divides the world into seven unique regions. Content designated for one region  
cannot be read by playback systems in another region. While CSS is used to prevent digital copies of the  
DVD content, another technology devised by Macrovision is used to prevent analog copies of the DVD  
content. The Macrovision standard is a scrambling system widely used by the movie industry to prevent  
unauthorized duplication of video content using commercial VCRs. DVD playback systems must support  
both CSS and Macrovision copy protection standards.  
The first time that you insert a DVD Video disc into the drive, you will be prompted to set the region. If  
you relocate to a different region of the world, you can use the DVD Player software to change the region  
code.  
1-8 IBM Multi-Burner User’s Guide  
 
 
Note: You can change the DVD region code only five times. After you make five region code changes,  
the drive can play only MPEG-2 video titles that are associated with the fifth region code that you  
set.  
To change the region code, do the following:  
1. Turn on your computer and start your operating system.  
2. Click Start.  
3. Select Programs.  
4. Click Intervideo WinDVD.  
5. Click Intervideo WinDVD.  
6. Click the Properties icon to open the Properties window.  
7. Click the General Properties tab.  
8. Insert a single region DVD of the new region.  
9. Select the correct region code for your country.  
10. Click OK.  
Using drive letter access (DLA)  
Drive Letter Access (DLA) is provided so that you can write data to CD-R, CD-RW, DVD-RAM,  
DVD-RW, and DVD-R media. DVD-RAM, DVD-RW, and CD-RW media can be written to many times,  
while DVD-R and CD-R media can only be formatted and written to once.  
To format and write to DVD-R, CD-R, DVD-RAM, DVD-RW, or CD-RW media:  
1. Insert a disc into the drive.  
2. Double-click My Computer. Right-click the Multi-Burner drive letter.  
3. Click Format. Formatting a DVD can take up to 90 minutes.  
4. After formatting is complete, you can drag and drop files to the Multi-Burner drive icon, or you can  
move files in Windows Explorer.  
To make CD-R media compatible in other computers:  
1. Double-click My Computer. Right-click the Multi-Burner drive letter.  
2. Click Make Compatible.  
To use UDF formatted DVD-RAM, DVD-RW, or CD-RW media in other computers, a UDF reader is  
included on the User’s Guide and Software CD. To use the UDF reader, follow this procedure:  
1. Insert the User’s Guide and Software CD into the CD or DVD drive of the computer you want to use  
the UDF formatted discs with.  
2. Click Start.  
3. Click Run.  
4. Type e:\UDF\language where e is the drive letter of the CD or DVD drive, and language is your  
language.  
5. Click OK.  
6. Double-click SETUP.EXE and follow the on-screen instructions.  
Note: The UDF reader is only needed on systems that do not have another DLA program for CD-RW or  
DVD-RW installed.  
Using roxio VideoWave  
With roxio VideoWave, you can capture, edit, and record video and audio files. You can also use roxio  
VideoWave to create and record DVD videos using your own video and audio files. For more detailed  
information on roxio Videowave features, go to the VideoWave User’s Guide in the Start menu.  
The Video Edit window is the roxio VideoWave main window. In this window, you can import, edit, and  
convert your own video and audio files into an appropriate format. To play back from DVD video, video  
Installation and user’s guide 1-9  
 
 
files must be converted into MPEG-2 files with 48 kHz audio. You can make this selection from the  
Produce button in the VideoWave video editing window.  
When you have prepared and saved your video and audio files, click the DVD button on the left side of  
the VideoWave video editing window to launch the DVD authoring application. To use the authoring  
application, use Import to bring your videos into the library; then, drag-and-drop them in the order that  
you would like to play them. You can also import still images to use as menu backgrounds and audio  
clips to use with menus and videos.  
You can drag-and-drop your content in the order in which it will play to the time line of menus or videos  
at the top of the window. Selecting a menu enables you to drag buttons to the menu.  
When you have created your DVD video, click the DVD icon in the authoring application to record your  
video to the hard disk drive, DVD-R, DVD-RW, or DVD-RAM media. If you create a layout in the hard  
disk drive, you can copy it to DVD-RAM, DVD-RW, or DVD-R media later using the drag-and-drop  
method. A DVD video that is recorded directly to DVD-R media can be played back in almost any DVD  
player or computer. DVD videos recorded on DVD-RAM or DVD-RW media can be played back in  
DVD-RAM drives, DVD-Multi Player ROM drives, and some DVD video players.  
If you use VideoWave to create a DVD video layout on your hard disk, you can use RecordNow to  
record files on a DVD-R that will play in most DVD players and computers with DVD-ROM drives.  
Maintaining the drive  
This section includes information on taking care of your drive and the CDs and DVDs that you use with  
the drive.  
Caring for a CD or DVD  
Digital discs are high-density media that must be handled with care and kept clean to ensure that they  
remain readable. The following precautions help to prolong the life of your discs.  
Attention  
Wiping a disc using a circular motion can damage the disc and cause data loss.  
v Handle the disc by the edges or the center hole. Do not touch the surface of the disc.  
v To remove dust or fingerprints, wipe the disc from the center to the edge with a soft, lint-free cloth.  
v Do not write on the surface of the disc.  
v Do not place the disc in direct sunlight.  
v Do not use commercial cleaners to clean the disc.  
v Do not bend the disc.  
Caring for the drive  
To protect your drive during operation, observe the following precautions:  
v Do not move the drive when it is in use. Doing so might cause data error or damage the drive or  
media.  
v Avoid exposing the drive to the following conditions:  
– High humidity  
– High temperature  
– Excessive dust  
– Mechanical vibration  
– Sudden shock or dropping  
– Placement on an inclined surface  
– Direct sunlight  
1-10 IBM Multi-Burner User’s Guide  
 
 
– Sudden temperature changes  
v Do not insert foreign objects into the drive.  
v Do not stack objects on the drive.  
v Do not remove the drive cover or attempt to service the drive.  
v Do not move the drive unit without removing any discs from the disc drawer and making sure that  
the drawer is closed.  
Keep the original packing materials. If you need to ship the drive unit to a different location, use the  
original packing materials to ensure that the drive is transported safely  
Installation and user’s guide 1-11  
 
1-12 IBM Multi-Burner User’s Guide  
 
Appendix A. Product specifications  
This appendix includes the following information:  
v Physical specifications  
v Power requirements  
v Environmental requirements  
v Read speeds  
v Write speeds  
Physical specifications  
The physical specifications1 of the drive are listed in the following table.  
Physical specification  
Height  
Width  
Length  
Weight  
42 mm (1.7 in.)  
148 mm (5.8 in.)  
185 mm (7.3 in.)  
830 g (1.8 lb.)  
Power requirements  
The following table lists the power specifications by voltage level for the drive. The power specifications  
are measured at the drive power connector and are nominal values.  
Power specifications  
At voltage  
Voltage  
5V dc  
Average  
800 mA  
1000 mA  
Maximum  
1.5 A  
At voltage  
12V dc  
1.8 A  
Environmental requirements  
Specification  
Operational  
Nonoperational  
Temperature (noncondensing)  
+5° C to +45° C  
-20° C to +60° C  
(+41° F to +113° F)  
15% to 85%  
(-4° F to 140° F)  
10% to 90%  
Relative humidity (noncondensing)  
1. Product-description data represents IBM’s design objectives and is provided for comparative purposes; actual results might vary  
based on a variety of factors. This product data does not constitute a warranty. Data is subject to change without notice.  
© Copyright IBM Corp. 2002  
A-1  
 
 
Read speeds  
Media  
Read Speed  
DVD-ROM (single layer)  
DVD-ROM (dual layer)  
DVD-R (4.7 GB)  
DVD-RW (4.7 GB)  
DVD-RAM (4.7/9.4 GB)  
DVD-RAM (2.6 GB)  
CD-ROM  
4.1 - 10X constant angular velocity (CAV)  
3.3 - 8X CAV  
3.3 - 8X CAV  
3.3 - 8X CAV  
2X zoned constant linear velocity (ZCLV)  
1X ZCLV  
14 - 32X CAV  
CD-R  
14 - 32X CAV  
CD-RW  
10 - 24X CAV  
CD-DA (DAE)  
6.7 - 16X CAV  
Write speeds  
Media  
Write speeds  
2X CLV  
DVD-R (for general, 650 nm)  
DVD-RW (Version 1.1)  
DVD-RAM (Version 2.1, 4.7/9.4 GB)  
CD-R  
1X CLV  
2X ZCLV  
12X CLV  
8X CLV  
CD-RW  
A-2 IBM Multi-Burner User’s Guide  
 
Appendix B. Problem solving  
Computer problems can be caused by hardware, software, or human error. Using the information in this  
section, you might be able to solve problems yourself or gather helpful information to pass on to a  
service technician. You might also need to refer to your computer, operating system, or sound-adapter  
documentation.  
Review the following list for any problem descriptions that might fit your situation.  
v Your computer or drive does not operate correctly, or the busy indicator light does not turn on.  
Take the following actions:  
1. Check that the disc is label side up in the drive.  
2. Check that all devices are properly connected to the computer and to an electrical outlet.  
3. Turn off the computer, unplug the cables for your computer and all attached devices, and remove  
the computer cover.  
4. Check that all power and IDE cables are securely attached. Disconnect the IDE cable and check it  
for bent or misaligned pins. If you do not find any, reconnect the cable.  
5. Replace the computer cover, and reattach all cables and power cords. Turn on the computer, restart  
the operating system, and press the Open/Close button. If the tray fails to open and the busy  
indicator does not light, turn off the computer and try using another 4-pin dc power cable.  
6. Check that the color-coded edge on the IDE cable aligns with pin 1 on the IDE port and is closest  
to the power cable on the drive. See “Step 5. Attaching the cables to the drive” on page 1-5.  
7. Check the drive and any other device on the IDE cable for the proper settings. See “Step 3. Setting  
the configuration jumpers” on page 1-4.  
8. Do the following:  
– If the middle connector on the IDE cable is attached to the IDE port on the system board,  
remove the connector and reattach the cable.  
– If there is only one device on the IDE port, attach the connector at one end of the cable to the  
IDE port and the connector at the other end to the device, leaving the middle connector (if there  
is one) open.  
– If there are two devices on the IDE port, attach the connector at one end of the cable to the IDE  
port. If there is a hard disk drive, attach it to the connector at the other end of the cable, and  
attach the drive to the middle connector.  
v You cannot access the drive, or the DVD-RAM (CD-ROM) icon is not displayed.  
When the drive is properly installed a DVD-RAM or CD-ROM icon is displayed in the My Computer  
window. Double-click My Computer. If a CD-ROM icon is not present in the window that opens,  
verify that the drive has been properly installed. Verify that the configuration jumper is set properly.  
See “Step 3. Setting the configuration jumpers” on page 1-4. Restart your computer. If a drive icon is  
still not found, continue with the following steps:  
1. Click Start.  
2. Select Settings.  
3. Select Control Panel.  
4. Click System.  
5. Click the Device Manager tab.  
6. Double-click View Devices by Type.  
7. Select Hard Disk Controllers from the list displayed in the Device Manager window. Verify that  
there are no conflicts with the controller. The device status indicates whether the controller is  
working properly.  
© Copyright IBM Corp. 2002  
B-1  
 
 
8. Select CD-ROM from the list that is displayed in the Device Manager window. Verify that a  
CD-ROM device is present in the list and that no conflicts exist. The device status indicates  
whether the device is working properly.  
9. Click OK.  
10. Close all windows and restart the computer.  
If the device icon is still not present, check cable connections and device-jumper settings, and resolve  
any conflicts that might exist.  
v The drive is not recognized by the operating system, or the drive performs erratically.  
Some computers have Compatible and High Performance modes for mass storage devices. Normally,  
the drive functions better under the High Performance mode. However, if your drive is not functioning  
properly in that mode, you might need to use the Compatible mode.  
Use the following procedure to check the configuration-setup information for your computer.  
1. Access your configuration utility program.  
2. Select Devices.  
3. Scroll down to the Mass Storage Devices section.  
Refer to the documentation that comes with your computer for additional details on selecting IDE  
performance modes.  
v The computer does not recognize the drive after the device drivers are loaded.  
Check for incompatibilities among the Multi-Burner device driver and other device drivers or other  
hardware in your computer. Create a system diskette with minimum CONFIG.SYS and  
AUTOEXEC.BAT system files.  
1. Before creating special CONFIG.SYS and AUTOEXEC.BAT files, make a backup copy of these files  
in a convenient directory. From a DOS prompt, do the following:  
a. Type copy CONFIG.SYS CONFIG.IBM and press Enter.  
b. Type copy AUTOEXEC.BAT AUTOEXEC.IBM and press Enter.  
2. Insert a blank, formatted diskette into the diskette drive.  
3. Copy the CONFIG.SYS and AUTOEXEC.BAT files onto the diskette.  
4. Turn off the computer and ensure that the system diskette (the diskette that you created) is in the  
diskette drive.  
5. Restart the computer (the computer starts from the system diskette).  
6. Observe the startup messages and ensure that the device driver IBMIDECD.SYS loads. When  
MSCDEX loads, observe the drive letter that the computer assigns to the Multi-Burner.  
7. Load a data CD into the loading tray; then wait until the Busy indicator is not lit.  
8. Attempt to read the disc by typing dir x:, where x is the Multi-Burner drive letter assigned after  
the MSCDEX message.  
– If the computer is able to read the disc, a conflict probably exists among the device drivers that  
are loaded by the CONFIG.SYS or AUTOXEC.BAT file. You need to resolve this device conflict.  
Refer to the documentation that comes with your computer for more information on resolving  
device conflicts.  
– If you are unable to access the disc, you might have a hardware problem. If you are unable to  
read the disc or a drive letter is not assigned by MSCDEX, go to the next step.  
9. Turn off the computer, unplug the cables from the electrical outlets for your computer and all  
attached devices, and remove the computer cover.  
10. Disconnect the IDE and power cables for all IDE devices except the Multi-Burner.  
11. Configure the Multi-Burner as a master and connect it to the last IDE connector on the primary  
IDE port.  
12. Reinstall the computer cover. Reconnect the keyboard; plug the power cords into electrical outlets.  
13. Insert the system diskette in the diskette drive and a data disc in the Multi-Burner.  
B-2 IBM Multi-Burner User’s Guide  
 
14. Restart the computer.  
15. Attempt to read the disc by typing dir C: (the Multi-Burner is drive C because it is the only  
device that is connected to the IDE port.)  
– If the computer is able to read the disc, a conflict probably exists with one of the devices that  
are installed on your computer. You need to resolve this device driver conflict. Check the  
configuration jumper settings for the other devices or refer to our device documentation.  
– If you are unable to access the disc, you might have a hardware problem. If the Multi-Burner  
still does not read the data disc, the Multi-Burner might be defective. Go to Appendix D,  
“Warranty information” on page D-1.  
v The disc cannot be read.  
Take the following actions:  
1. The disc might be dirty; clean it as described in “Caring for a CD or DVD” on page 1-10.  
2. The disc might be defective; try another disc.  
3. The disc is not ISO-9660, High Sierra Group (HSG), or Universal Disc Format (UDS) compatible.  
Check with your place of purchase.  
v There is no sound from the disc.  
1. Check that you are not using a data CD.  
2. Adjust the audio-adapter volume control. See the documentation that comes with your audio  
adapter and audio-CD player program.  
3. Turn off the computer, unplug the cables from the electrical outlets for your computer and all  
attached devices, and remove the computer cover. Ensure that the audio-signal cable connects the  
Multi-Burner with the sound adapter.  
v You receive an error message.  
Take the following actions for these common error messages:  
– CDR-103  
The disc in the Multi-Burner is not High Sierra, ISO 9660, or UDF format. The Multi-Burner does  
not support the media.  
– CDR-101  
A ″not ready reading the drive″ situation occurs when you try to access the Multi-Burner before the  
drive is ready. The busy indicator lights when you attempt to access the drive after loading a disc  
into the loading tray. Wait until the busy indicator is no longer lit before attempting to access the  
drive.  
v The connectors on the audio cables that are provided do not fit the connector on your audio adapter.  
Some audio adapters might require a special cable. See the documentation that comes with your audio  
adapter.  
You might have to separately purchase an audio cable for the Multi-Burner. If you are using an IBM  
computer or IBM audio adapter, refer to Appendix D, “Warranty information” on page D-1.  
v The Multi-Burner does not operate and will not allow the disc to eject.  
Turn off the computer and straighten a large paper clip to form a tool. The straightened end must  
extend at least 45 mm (1.8 in.). Insert the extended end into the emergency eject hole on the front of  
the drive (see “Front view of the drive” on page 1-3). Push the paper clip until the tray opens. Gently  
pull out the tray until you can remove the disc.  
Appendix B. Problem solving B-3  
 
B-4 IBM Multi-Burner User’s Guide  
 
Appendix C. Customizing the device driver configuration  
settings  
Microsoft Windows Me and Windows 2000 Professional have two device-driver configuration parameters:  
Auto Insert Notify and DMA.  
The Auto Insert Notify parameter enables the computer to start playing or accessing the disc  
automatically after being inserted in the drive. The DMA parameter improves the computer performance  
by having the computer DMA controller handle data transfers from the CD to memory, freeing the  
computer’s microprocessor to preform more important tasks. For example, activating DMA might make  
movies and games run more smoothly because the microprocessor is allocating more processing time to  
video.  
Enabling DMA for Windows Me  
To change the DMA parameter settings in Windows Me, do the following:  
1. Click Start  
2. Click Settings  
3. Click Control Panel.  
4. Click View all control panel options.  
5. Double-click System.  
6. Click the Device Manager tab.  
7. Double-click CD-ROM.  
8. Click on the drive that you want to modify.  
9. Click the Settings tab.  
10. Click to select the DMA check box.  
11. Click OK.  
Enabling DMA for Windows 2000 Professional  
To change the parameter settings for Windows 2000 Professional, do the following:  
1. Click Start  
2. Click Settings.  
3. Click Control Panel.  
4. Double-click System.  
5. Click the Hardware tab.  
6. Click the Device Manager button.  
7. Click the IDE ATA/ATAPI controller to expand the tree.  
8. Click the device that corresponds to the controller where your Multi-Burner is located (Primary IDE  
or Secondary IDE).  
9. Click the Advanced Settings tab.  
10. Select the Transfer Mode pull-down menu and select DMA if available.  
11. Click OK.  
12. Click Close to close the System Properties window. A message is displayed informing you that the  
system settings have changed.  
13. Click OK to restart your computer.  
© Copyright IBM Corp. 2002  
C-1  
 
 
Enabling DMA for Windows XP  
To change the DMA parameter setting from the Windows XP desktop, do the following:  
1. Click Start  
2. Click Control Panel.  
3. Click Switch to classic view.  
4. Double-click System.  
5. Click the Hardware tab.  
6. Click the Device Manager button.  
7. Click the IDE ATA/ATAPI controller to expand the tree.  
8. Double-click on the controller where your Multi-Burner is located (Primary IDE or Secondary IDE).  
9. Click the Advanced Settings tab.  
10. Select the appropriate Transfer Mode pull-down that corresponds to the Multi-Burner location,  
(Device 0 for Master, Device 1 for Slave)  
11. Select DMA if it is available.  
12. Click OK.  
C-2 IBM Multi-Burner User’s Guide  
 
 
Appendix D. Warranty information  
This section contains the warranty period for your product, information about obtaining warranty service  
and support, and the IBM Statement of Limited Warranty.  
Warranty period  
Contact your place of purchase for warranty service information. Some IBM Machines are eligible for  
on-site warranty service depending on the country or region where service is performed.  
Machine - IBM Multi-Burner  
Warranty period - One year  
Service and support  
The following information describes the technical support that is available for your product, during the  
warranty period or throughout the life of the product. Refer to your IBM Statement of Limited Warranty  
for a full explanation of IBM warranty terms.  
Warranty information on the World Wide Web  
The IBM Machine Warranties Web site at http://www.ibm.com/servers/support/machine_warranties/  
contains a worldwide overview of the IBM Limited Warranty for IBM Machines, a glossary of terms used  
in the Statement of Limited Warranty, Frequently Asked Questions (FAQ), and links to Product Support  
Web pages. The IBM Statement of Limited Warranty is available from this Web site in 29 languages in  
Portable Document Format (PDF).  
Online technical support  
Online technical support is available during the life of your product through the Personal Computing  
Support Web site at http://www.ibm.com/pc/support/.  
During the warranty period, assistance for replacement or exchange of defective components is available.  
In addition, if your IBM option is installed in an IBM computer, you might be entitled to service at your  
location. Your technical support representative can help you determine the best alternative.  
Telephone technical support  
Installation and configuration support through the IBM HelpCenter® will be withdrawn or made  
available for a fee, at IBM’s discretion, 90 days after the option has been withdrawn from marketing.  
Additional support offerings, including step-by-step installation assistance, are available for a nominal  
fee.  
To assist the technical support representative, have available as much of the following information as  
possible:  
v Option name  
v Option number  
v Proof of purchase  
v Computer manufacturer, model, serial number (if IBM), and manual  
v Exact wording of the error message (if any)  
v Description of the problem  
© Copyright IBM Corp. 2002  
D-1  
 
 
v Hardware and software configuration information for your system  
If possible, be at your computer. Your technical support representative might want to walk you through  
the problem during the call.  
For the support telephone number and support hours by country, refer to the following table. If the  
number for your country or region is not listed, contact your IBM reseller or IBM marketing  
representative. Response time may vary depending on the number and nature of the calls received.  
Support 24 hours a day, 7 days a week  
Canada (Toronto only)  
Canada (all other)  
416-383-3344  
1-800-565-3344  
1-800-772-2227  
U.S.A. and Puerto Rico  
All other countries and regions  
Go to http://www.ibm.com/pc/support/, and click  
Support Phone List.  
D-2 IBM Multi-Burner User’s Guide  
 
IBM Statement of Limited Warranty Z125-4753-06 8/2000  
Part 1 - General Terms  
This Statement of Limited Warranty includes Part 1 - General Terms and Part 2 - Country-unique Terms.  
The terms of Part 2 replace or modify those of Part 1. The warranties provided by IBM in this Statement  
of Limited Warranty apply only to Machines you purchase for your use, and not for resale, from IBM or  
your reseller. The term “Machine” means an IBM machine, its features, conversions, upgrades, elements,  
or accessories, or any combination of them. The term “Machine” does not include any software programs,  
whether pre-loaded with the Machine, installed subsequently or otherwise. Unless IBM specifies  
otherwise, the following warranties apply only in the country where you acquire the Machine. Nothing in  
this Statement of Limited Warranty affects any statutory rights of consumers that cannot be waived or  
limited by contract. If you have any questions, contact IBM or your reseller.  
The IBM Warranty for Machines: IBM warrants that each Machine 1) is free from defects in materials  
and workmanship and 2) conforms to IBM’s Official Published Specifications (“Specifications”). The  
warranty period for a Machine is a specified, fixed period commencing on its Date of Installation. The  
date on your sales receipt is the Date of Installation unless IBM or your reseller informs you otherwise.  
If a Machine does not function as warranted during the warranty period, and IBM or your reseller are  
unable to either 1) make it do so or 2) replace it with one that is at least functionally equivalent, you may  
return it to your place of purchase and your money will be refunded.  
Extent of Warranty: The warranty does not cover the repair or exchange of a Machine resulting from  
misuse, accident, modification, unsuitable physical or operating environment, improper maintenance by  
you, or failure caused by a product for which IBM is not responsible. The warranty is voided by removal  
or alteration of Machine or parts identification labels.  
THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE ALL OTHER  
WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,  
THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE. THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU  
MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION.  
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR  
IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO  
YOU. IN THAT EVENT, SUCH WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY  
PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD.  
Items Not Covered by Warranty: IBM does not warrant uninterrupted or error-free operation of a  
Machine. Any technical or other support provided for a Machine under warranty, such as assistance via  
telephone with “how-to” questions and those regarding Machine set-up and installation, will be provided  
WITHOUT WARRANTIES OF ANY KIND.  
Warranty Service: To obtain warranty service for a Machine, contact IBM or your reseller. If you do not  
register your Machine with IBM, you may be required to present proof of purchase.  
During the warranty period, IBM or your reseller, if approved by IBM to provide warranty service,  
provides without charge certain types of repair and exchange service to keep Machines in, or restore  
them to, conformance with their Specifications. IBM or your reseller will inform you of the available  
types of service for a Machine based on its country of installation. At its discretion, IBM or your reseller  
will 1) either repair or exchange the failing Machine and 2) provide the service either at your location or  
a service center. IBM or your reseller will also manage and install selected engineering changes that apply  
to the Machine.  
Some parts of IBM Machines are designated as Customer Replaceable Units (called “CRUs”), e.g.,  
keyboards, memory, or hard disk drives. IBM ships CRUs to you for replacement by you. You must  
Appendix D. Warranty information D-3  
 
 
return all defective CRUs to IBM within 30 days of your receipt of the replacement CRU. You are  
responsible for downloading designated Machine Code and Licensed Internal Code updates from an IBM  
Internet Web site or from other electronic media, and following the instructions that IBM provides.  
When warranty service involves the exchange of a Machine or part, the item IBM or your reseller  
replaces becomes its property and the replacement becomes yours. You represent that all removed items  
are genuine and unaltered. The replacement may not be new, but will be in good working order and at  
least functionally equivalent to the item replaced. The replacement assumes the warranty service status of  
the replaced item. Many features, conversions, or upgrades involve the removal of parts and their return  
to IBM. A part that replaces a removed part will assume the warranty service status of the removed part.  
Before IBM or your reseller exchanges a Machine or part, you agree to remove all features, parts, options,  
alterations, and attachments not under warranty service.  
You also agree to  
1. ensure that the Machine is free of any legal obligations or restrictions that prevent its exchange;  
2. obtain authorization from the owner to have IBM or your reseller service a Machine that you do not  
own; and  
3. where applicable, before service is provided:  
a. follow the problem determination, problem analysis, and service request procedures that IBM or  
your reseller provides;  
b. secure all programs, data, and funds contained in a Machine;  
c. provide IBM or your reseller with sufficient, free, and safe access to your facilities to permit them  
to fulfill their obligations; and  
d. inform IBM or your reseller of changes in a Machine’s location.  
IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBM’s possession or 2) in  
transit in those cases where IBM is responsible for the transportation charges.  
Neither IBM nor your reseller is responsible for any of your confidential, proprietary or personal  
information contained in a Machine which you return to IBM or your reseller for any reason. You should  
remove all such information from the Machine prior to its return.  
Limitation of Liability: Circumstances may arise where, because of a default on IBM’s part or other  
liability, you are entitled to recover damages from IBM. In each such instance, regardless of the basis on  
which you are entitled to claim damages from IBM (including fundamental breach, negligence,  
misrepresentation, or other contract or tort claim), except for any liability that cannot be waived or  
limited by applicable laws, IBM is liable for no more than  
1. damages for bodily injury (including death) and damage to real property and tangible personal  
property; and  
2. the amount of any other actual direct damages, up to the charges (if recurring, 12 months’ charges  
apply) for the Machine that is subject of the claim. For purposes of this item, the term “Machine”  
includes Machine Code and Licensed Internal Code.  
This limit also applies to IBM’s suppliers and your reseller. It is the maximum for which IBM, its  
suppliers, and your reseller are collectively responsible.  
UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE FOLLOWING: 1) THIRD-PARTY  
CLAIMS AGAINST YOU FOR DAMAGES (OTHER THAN THOSE UNDER THE FIRST ITEM  
LISTED ABOVE); 2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR 3) SPECIAL,  
INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL  
DAMAGES, LOST PROFITS OR LOST SAVINGS, EVEN IF IBM, ITS SUPPLIERS OR YOUR  
RESELLER IS INFORMED OF THEIR POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW THE  
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE  
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.  
D-4 IBM Multi-Burner User’s Guide  
 
Governing Law  
Governing Law: Both you and IBM consent to the application of the laws of the country in which you  
acquired the Machine to govern, interpret, and enforce all of your and IBM’s rights, duties, and  
obligations arising from, or relating in any manner to, the subject matter of this Agreement, without  
regard to conflict of law principles.  
Part 2 - Country-unique Terms  
AMERICAS  
BRAZIL  
Governing Law: The following is added after the first sentence:Any litigation arising from this Agreement  
will be settled exclusively by the court of Rio de Janeiro.  
NORTH AMERICA  
Warranty Service: The following is added to this Section: To obtain warranty service from IBM in Canada or  
the United States, call 1-800-IBM-SERV (426-7378).  
CANADA  
Governing Law: The following replaces “laws of the country in which you acquired the Machine” in the first  
sentence: laws in the Province of Ontario.  
UNITED STATES  
Governing Law: The following replaces “laws of the country in which you acquired the Machine” in the first  
sentence: laws of the State of New York.  
ASIA PACIFIC  
AUSTRALIA  
The IBM Warranty for Machines: The following paragraph is added to this Section: The warranties specified  
in this Section are in addition to any rights you may have under the Trade Practices Act 1974 or other  
similar legislation and are only limited to the extent permitted by the applicable legislation.  
Limitation of Liability: The following is added to this Section: Where IBM is in breach of a condition or  
warranty implied by the Trade Practices Act 1974 or other similar legislation, IBM’s liability is limited to  
the repair or replacement of the goods or the supply of equivalent goods. Where that condition or  
warranty relates to right to sell, quiet possession or clear title, or the goods are of a kind ordinarily  
acquired for personal, domestic or household use or consumption, then none of the limitations in this  
paragraph apply.  
Governing Law: The following replaces “laws of the country in which you acquired the Machine” in the first  
sentence: laws of the State or Territory.  
CAMBODIA, LAOS, AND VIETNAM  
Governing Law: The following replaces “laws of the country in which you acquired the Machine” in the first  
sentence:laws of the State of New York.  
The following is added to this Section: Disputes and differences arising out of or in connection with this  
Agreement shall be finally settled by arbitration which shall be held in Singapore in accordance with the  
Appendix D. Warranty information D-5  
 
 
rules of the International Chamber of Commerce (ICC). The arbitrator or arbitrators designated in  
conformity with those rules shall have the power to rule on their own competence and on the validity of  
the Agreement to submit to arbitration. The arbitration award shall be final and binding for the parties  
without appeal and the arbitral award shall be in writing and set forth the findings of fact and the  
conclusions of law.  
All proceedings shall be conducted, including all documents presented in such proceedings, in the  
English language. The number of arbitrators shall be three, with each side to the dispute being entitled to  
appoint one arbitrator.  
The two arbitrators appointed by the parties shall appoint a third arbitrator before proceeding upon the  
reference. The third arbitrator shall act as chairman of the proceedings. Vacancies in the post of chairman  
shall be filled by the president of the ICC. Other vacancies shall be filled by the respective nominating  
party. Proceedings shall continue from the stage they were at when the vacancy occurred.  
If one of the parties refuses or otherwise fails to appoint an arbitrator within 30 days of the date the other  
party appoints its, the first appointed arbitrator shall be the sole arbitrator, provided that the arbitrator  
was validly and properly appointed.  
The English language version of this Agreement prevails over any other language version.  
HONG KONG AND MACAU  
Governing Law: The following replaces “laws of the country in which you acquired the Machine” in the first  
sentence: laws of Hong Kong Special Administrative Region.  
INDIA  
Limitation of Liability: The following replaces items 1 and 2 of this Section:  
1. liability for bodily injury (including death) or damage to real property and tangible personal property  
will be limited to that caused by IBM’s negligence;  
2. as to any other actual damage arising in any situation involving nonperformance by IBM pursuant to,  
or in any way related to the subject of this Statement of Limited Warranty, IBM’s liability will be  
limited to the charge paid by you for the individual Machine that is the subject of the claim.  
JAPAN  
Governing Law: The following sentence is added to this Section:Any doubts concerning this Agreement will  
be initially resolved between us in good faith and in accordance with the principle of mutual trust.  
NEW ZEALAND  
The IBM Warranty for Machines: The following paragraph is added to this Section: The warranties specified  
in this Section are in addition to any rights you may have under the Consumer Guarantees Act 1993 or  
other legislation which cannot be excluded or limited. The Consumer Guarantees Act 1993 will not apply  
in respect of any goods which IBM provides, if you require the goods for the purposes of a business as  
defined in that Act.  
Limitation of Liability: The following is added to this Section: Where Machines are not acquired for the  
purposes of a business as defined in the Consumer Guarantees Act 1993, the limitations in this Section  
are subject to the limitations in that Act.  
PEOPLE’S REPUBLIC OF CHINA (PRC)  
Governing Law: The following replaces this Section: Both you and IBM consent to the application of the  
laws of the State of New York (except when local law requires otherwise) to govern, interpret, and  
D-6 IBM Multi-Burner User’s Guide  
 
enforce all your and IBM’s rights, duties, and obligations arising from, or relating in any manner to, the  
subject matter of this Agreement, without regard to conflict of law principles.  
Any disputes arising from or in connection with this Agreement will first be resolved by friendly  
negotiations, failing which either of us has the right to submit the dispute to the China International  
Economic and Trade Arbitration Commission in Beijing, the PRC, for arbitration in accordance with its  
arbitration rules in force at the time. The arbitration tribunal will consist of three arbitrators. The  
language to be used therein will be English and Chinese. An arbitral award will be final and binding on  
all the parties, and will be enforceable under the Convention on the Recognition and Enforcement of  
Foreign Arbitral Awards (1958).  
The arbitration fee will be borne by the losing party unless otherwise determined by the arbitral award.  
During the course of arbitration, this Agreement will continue to be performed except for the part which  
the parties are disputing and which is undergoing arbitration.  
EUROPE, MIDDLE EAST, AFRICA (EMEA)  
THE FOLLOWING TERMS APPLY TO ALL EMEA COUNTRIES: The terms of this Statement of Limited  
Warranty apply to Machines purchased from IBM or an IBM reseller.  
Warranty Service: If you purchase an IBM Machine in Austria, Belgium, Denmark, Estonia, Finland,  
France, Germany, Greece, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Netherlands, Norway,  
Portugal, Spain, Sweden, Switzerland or United Kingdom, you may obtain warranty service for that  
Machine in any of those countries from either (1) an IBM reseller approved to perform warranty service  
or (2) from IBM. If you purchase an IBM Personal Computer Machine in Albania, Armenia, Belarus,  
Bosnia and Herzegovina, Bulgaria, Croatia, Czech Republic, Georgia, Hungary, Kazakhstan, Kirghizia,  
Federal Republic of Yugoslavia, Former Yugoslav Republic of Macedonia (FYROM), Moldova, Poland,  
Romania, Russia, Slovak Republic, Slovenia, or Ukraine, you may obtain warranty service for that  
Machine in any of those countries from either (1) an IBM reseller approved to perform warranty service  
or (2) from IBM.  
If you purchase an IBM Machine in a Middle Eastern or African country, you may obtain warranty  
service for that Machine from the IBM entity within the country of purchase, if that IBM entity provides  
warranty service in that country, or from an IBM reseller, approved by IBM to perform warranty service  
on that Machine in that country. Warranty service in Africa is available within 50 kilometers of an IBM  
authorized service provider. You are responsible for transportation costs for Machines located outside 50  
kilometers of an IBM authorized service provider.  
Governing Law: The applicable laws that govern, interpret and enforce rights, duties, and obligations of  
each of us arising from, or relating in any manner to, the subject matter of this Statement, without regard  
to conflict of laws principles, as well as Country-unique terms and competent court for this Statement are  
those of the country in which the warranty service is being provided, except that in 1) Albania,  
Bosnia-Herzegovina, Bulgaria, Croatia, Hungary, Former Yugoslav Republic of Macedonia, Romania,  
Slovakia, Slovenia, Armenia, Azerbaijan, Belarus, Georgia, Kazakhstan, Kyrgyzstan, Moldova, Russia,  
Tajikistan, Turkmenistan, Ukraine, and Uzbekistan, the laws of Austria apply; 2) Estonia, Latvia, and  
Lithuania, the laws of Finland apply; 3) Algeria, Benin, Burkina Faso, Cameroon, Cape Verde, Central  
African Republic, Chad, Congo, Djibouti, Democratic Republic of Congo, Equatorial Guinea, France,  
Gabon, Gambia, Guinea, Guinea-Bissau, Ivory Coast, Lebanon, Mali, Mauritania, Morocco, Niger, Senegal,  
Togo, and Tunisia, this Agreement will be construed and the legal relations between the parties will be  
determined in accordance with the French laws and all disputes arising out of this Agreement or related  
to its violation or execution, including summary proceedings, will be settled exclusively by the  
Commercial Court of Paris; 4) Angola, Bahrain, Botswana, Burundi, Egypt, Eritrea, Ethiopia, Ghana,  
Jordan, Kenya, Kuwait, Liberia, Malawi, Malta, Mozambique, Nigeria, Oman, Pakistan, Qatar, Rwanda,  
Sao Tome, Saudi Arabia, Sierra Leone, Somalia, Tanzania, Uganda, United Arab Emirates, United  
Kingdom, West Bank/Gaza, Yemen, Zambia, and Zimbabwe, this Agreement will be governed by English  
Appendix D. Warranty information D-7  
 
Law and disputes relating to it will be submitted to the exclusive jurisdiction of the English courts; and  
5) in Greece, Israel, Italy, Portugal, and Spain any legal claim arising out of this Statement will be brought  
before, and finally settled by, the competent court of Athens, Tel Aviv, Milan, Lisbon, and Madrid,  
respectively.  
THE FOLLOWING TERMS APPLY TO THE COUNTRY SPECIFIED:  
AUSTRIA AND GERMANY  
The IBM Warranty for Machines: The following replaces the first sentence of the first paragraph of this Section:  
The warranty for an IBM Machine covers the functionality of the Machine for its normal use and the  
Machine’s conformity to its Specifications.  
The following paragraphs are added to this Section:  
The minimum warranty period for Machines is six months. In case IBM or your reseller is unable to  
repair an IBM Machine, you can alternatively ask for a partial refund as far as justified by the reduced  
value of the unrepaired Machine or ask for a cancellation of the respective agreement for such Machine  
and get your money refunded.  
Extent of Warranty: The second paragraph does not apply.  
Warranty Service: The following is added to this Section: During the warranty period, transportation for  
delivery of the failing Machine to IBM will be at IBM’s expense.  
Limitation of Liability: The following paragraph is added to this Section: The limitations and exclusions  
specified in the Statement of Limited Warranty will not apply to damages caused by IBM with fraud or  
gross negligence and for express warranty.  
The following sentence is added to the end of item 2: IBM’s liability under this item is limited to the violation  
of essential contractual terms in cases of ordinary negligence.  
EGYPT  
Limitation of Liability: The following replaces item 2 in this Section: as to any other actual direct damages,  
IBM’s liability will be limited to the total amount you paid for the Machine that is the subject of the  
claim. For purposes of this item, the term “Machine” includes Machine Code and Licensed Internal Code.  
Applicability of suppliers and resellers (unchanged).  
FRANCE  
Limitation of Liability: The following replaces the second sentence of the first paragraph of this Section:In such  
instances, regardless of the basis on which you are entitled to claim damages from IBM, IBM is liable for  
no more than: (items 1 and 2 unchanged).  
IRELAND  
Extent of Warranty: The following is added to this Section: Except as expressly provided in these terms and  
conditions, all statutory conditions, including all warranties implied, but without prejudice to the  
generality of the foregoing all warranties implied by the Sale of Goods Act 1893 or the Sale of Goods and  
Supply of Services Act 1980 are hereby excluded.  
Limitation of Liability: The following replaces items one and two of the first paragraph of this Section:1. death  
or personal injury or physical damage to your real property solely caused by IBM’s negligence; and 2. the  
D-8 IBM Multi-Burner User’s Guide  
 
amount of any other actual direct damages, up to 125 percent of the charges (if recurring, the 12 months’  
charges apply) for the Machine that is the subject of the claim or which otherwise gives rise to the claim.  
Applicability of suppliers and resellers (unchanged).  
The following paragraph is added at the end of this Section: IBM’s entire liability and your sole remedy,  
whether in contract or in tort, in respect of any default shall be limited to damages.  
ITALY  
Limitation of Liability: The following replaces the second sentence in the first paragraph:In each such instance  
unless otherwise provided by mandatory law, IBM is liable for no more than: 1. (unchanged) 2. as to any  
other actual damage arising in all situations involving nonperformance by IBM pursuant to, or in any  
way related to the subject matter of this Statement of Warranty, IBM’s liability, will be limited to the total  
amount you paid for the Machine that is the subject of the claim. Applicability of suppliers and resellers  
(unchanged).  
The following replaces the third paragraph of this Section: Unless otherwise provided by mandatory law, IBM  
and your reseller are not liable for any of the following: (items 1 and 2 unchanged) 3) indirect damages,  
even if IBM or your reseller is informed of their possibility.  
SOUTH AFRICA, NAMIBIA, BOTSWANA, LESOTHO AND SWAZILAND  
Limitation of Liability: The following is added to this Section: IBM’s entire liability to you for actual  
damages arising in all situations involving nonperformance by IBM in respect of the subject matter of this  
Statement of Warranty will be limited to the charge paid by you for the individual Machine that is the  
subject of your claim from IBM.  
UNITED KINGDOM  
Limitation of Liability: The following replaces items 1 and 2 of the first paragraph of this Section:  
1. death or personal injury or physical damage to your real property solely caused by IBM’s negligence;  
2. the amount of any other actual direct damages or loss, up to 125 percent of the charges (if recurring,  
the 12 months’ charges apply) for the Machine that is the subject of the claim or which otherwise  
gives rise to the claim;  
The following item is added to this paragraph: 3. breach of IBM’s obligations implied by Section 12 of the Sale  
of Goods Act 1979 or Section 2 of the Supply of Goods and Services Act 1982.  
Applicability of suppliers and resellers (unchanged).  
The following is added to the end of this Section: IBM’s entire liability and your sole remedy, whether in  
contract or in tort, in respect of any default shall be limited to damages.  
Appendix D. Warranty information D-9  
 
D-10 IBM Multi-Burner User’s Guide  
 
Appendix E. Notices  
IBM may not offer the products, services, or features discussed in this document in all countries. Consult  
your local IBM representative for information on the products and services currently available in your  
area. Any reference to an IBM product, program, or service is not intended to state or imply that only  
that IBM product, program, or service may be used. Any functionally equivalent product, program, or  
service that does not infringe any IBM intellectual property right may be used instead. However, it is the  
user’s responsibility to evaluate and verify the operation of any non-IBM product, program, or service.  
IBM may have patents or pending patent applications covering subject matter described in this  
document. The furnishing of this document does not give you any license to these patents. You can send  
license inquiries, in writing, to:  
IBM Director of Licensing  
IBM Corporation  
North Castle Drive  
Armonk, NY 10504-1785  
U.S.A.  
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION “AS IS”  
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT  
LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR  
FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or  
implied warranties in certain transactions, therefore, this statement may not apply to you.  
This information could include technical inaccuracies or typographical errors. Changes are periodically  
made to the information herein; these changes will be incorporated in new editions of the publication.  
IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this  
publication at any time without notice.  
IBM may use or distribute any of the information you supply in any way it believes appropriate without  
incurring any obligation to you.  
Any references in this publication to non-IBM Web sites are provided for convenience only and do not in  
any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of  
the materials for this IBM product, and use of those Web sites is at your own risk.  
Trademarks  
The following terms are trademarks of the IBM Corporation in the United States or other countries or  
both:  
IBM  
HelpCenter  
Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or  
both.  
Intel and Pentium are trademarks or registered trademarks of Intel Corporation in the United States,  
other countries, or both  
Other company, product, and service names may be trademarks or service marks of others.  
© Copyright IBM Corp. 2002  
E-1  
 
 
Electronic emissions notices  
IBM Multi-Burner  
Federal Communications Commission (FCC) statement  
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
v Reorient or relocate the receiving antenna.  
v Increase the separation between the equipment and receiver.  
v Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
v Consult an IBM authorized dealer or service representative for help.  
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission  
limits. Proper cables and connectors are available from IBM authorized dealers. IBM is not responsible for  
any radio or television interference caused by using other than recommended cables and connectors or by  
unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could  
void the user’s authority to operate the equipment.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) this device may not cause harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
Responsible party:  
International Business Machines Corporation  
New Orchard Road  
Armonk, NY 10504  
Telephone: 1-919-543-2193  
Tested To Comply  
With FCC Standards  
FOR HOME OR OFFICE USE  
Industry Canada Class B emission compliance statement  
This Class B digital apparatus complies with Canadian ICES-003.  
Avis de conformite a la reglementation d’Industrie Canada  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
Deutsche EMV-Direktive (electromagnetische Verträglichkeit)  
Zulassungbescheinigunglaut dem Deutschen Gesetz über die elektromagnetische Verträglichkeit von  
Geräten (EMVG) vom 30. August 1995 (bzw. der EMC EG Richtlinie 89/336):  
E-2 IBM Multi-Burner User’s Guide  
 
 
Dieses Gerät ist berechtigt in Übereinstimmungmit dem Deutschen EMVG das EG-Konformitätszeichen -  
CE - zu führen. Verantwortlich für die Konformitätserklärung nach Paragraph 5 des EMVG ist die:  
IBM Deutschland Informationssysteme GmbH, 70548 Stuttgart.  
Informationen in Hinsicht EMVG Paragraph 3 Abs. (2) 2:  
Das Gerät erfüllt die Schutzanforderungen nach EN 50082-1 und EN 55022 Klasse B.  
EN 50082-1 Hinweis:  
“Wird dieses Gerät in einer industriellen Umgebung betrieben (wie in EN 50082-2 festgetlegt), dann kann  
es dabei eventuell gestört werden. In solch einem FA11 ist der Abstand bzw. die Abschirmungzu der  
industriellen Störquelle zu vergröβern.”  
Anmerkung:  
Um die Einhaltung des EMVG sicherzustellen sind die Geräte, wie in den IBM Handbüchern angegeben,  
zu installieren und zu betreiben.  
European Union - emission directive  
This product is in conformity with the protection requirements of EU Council Directive 89/366/ECC on  
the approximation of the laws of the Member States relating to electromagnetic compatibility.  
IBM can not accept responsibility for any failure to satisfy the protection requirements resulting from a  
non-recommended modification of the product, including the fitting of non-IBM option cards.  
This product has been tested and found to comply with the limits for Class B Information Technology  
Equipment according to European Standard EN 55022. The limits for Class B equipment were derived for  
typical residential environments to provide reasonable protection against interference with licensed  
communication devices.  
Union Européenne - Directive Conformité électromagnétique  
Ce produit est conforme aux exigences de protection de la Directive 89/336/EEC du Conseil de l’UE sur  
le rapprochement des lois des États membres en matière de compatibilité électromagnétique.  
IBM ne peut accepter aucune responsabilité pour le manquement aux exigences de protection résultant  
d’une modification non recommandée du produit, y compris l’installation de cartes autres que les cartes  
IBM.  
Ce produit a été testé et il satisfait les conditions de l’équipement informatique de Classe B en vertu de  
Standard européen EN 55022. Les conditions pour l’équipement de Classe B ont été définies en fonction  
d’un contexte résidentiel ordinaire afin de fournir une protection raisonnable contre l’interférence  
d’appareils de communication autorisés.  
Unione Europea - Directiva EMC (Conformidad électromagnética)  
Este producto satisface los requisitos de protección del Consejo de la UE, Directiva 89/336/CEE en lo que  
a la legislatura de los Estados Miembros sobre compatibilidad electromagnética se refiere.  
IBM no puede aceptar responsabilidad alguna si este producto deja de satisfacer dichos requisitos de  
protección como resultado de una modificación no recomendada del producto, incluyendo el ajuste de  
tarjetas de opción que no sean IBM.  
Appendix E. Notices E-3  
 
Este producto ha sido probado y satisface los límites para Equipos Informáticos Clase B de conformidad  
con el Estándar Europeo EN 55022. Los límites para los equipos de Clase B se han establecido para  
entornos residenciales típicos a fin de proporcionar una protección razonable contra las interferencias con  
dispositivos de comunicación licenciados.  
Union Europea - Normativa EMC  
Questo prodotto è conforme alle normative di protezione ai sensi della Direttiva del Consiglio  
dell’Unione Europea 89/336/CEE sull’armonizzazione legislativa degli stati membri in materia di  
compatibilità elettromagnetica.  
IBM non accetta responsabilità alcuna per la mancata conformità alle normative di protezione dovuta a  
modifiche non consigliate al prodotto, compresa l’installazione di schede e componenti di marca diversa  
da IBM.  
Le prove effettuate sul presente prodotto hanno accertato che esso rientra nei limiti stabiliti per le le  
apparecchiature di informatica Classe B ai sensi del Norma Europea EN 55022. I limiti delle  
apparecchiature della Classe B sono stati stabiliti al fine di fornire ragionevole protezione da interferenze  
mediante dispositivi di comunicazione in concessione in ambienti residenziali tipici.  
Japanese statement of compliance for products less than or equal to 20 A per phase  
E-4 IBM Multi-Burner User’s Guide  
 
 
ꢀꢁꢂꢃ  
Part Number: 22P6972  
Printed in U.S.A.  
(1P) P/N: 22P6972  
 

Graco Inc Marine Instruments 218 600 User Manual
Groupe SEB USA T FAL Scale Pse bb User Manual
Harbor Freight Tools Garage Door Opener 47821 User Manual
Healthrider Treadmill HRTL14900 User Manual
Honeywell Refrigerator PCR 300 User Manual
Hotpoint Washer 9536 User Manual
HP Hewlett Packard Satellite TV System 8517B User Manual
HP Hewlett Packard Switch 2000fc User Manual
HP Hewlett Packard Work Light B User Manual
Husqvarna Trimmer 322R User Manual